Language

产品中心

联系我们

当前位置:首页 >> 产品中心 >> 调光器 >> DALI LED调光器

DALI LED调光器

DALI 调光器

█  Features:

1. Standard Daliinterface, standard DT8 protocol

2.Timing on/off lighting function.

3.Built in PS bus is used for power supply.

4.The panel backlight turns dark after 8 p.m

5.Built in WiFi chip, can update time

6.Support mobile app control and access to third-party language platform

7.Touch the button, the backlight will turns red and sound at the same time

8.Tempered glass panel

9.Turn off with 30 seconds delay function

10.The color temperature value can be set according to the color temperatue range ofthe LED

    █  Features:

    1. Standard Daliinterface, standard DT8 protocol
    2.Timing on/off lighting function.

    3.Built in PS bus is used for power supply.

    4.The panel backlight turns dark after 8 p.m

    5.Built in WiFi chip, can update time

    6.Support mobile app control and access to third-party language platform

    7.Touch the button, the backlight will turns red and sound at the same time

    8.Tempered glass panel

    9.Turn off with 30 seconds delay function
    10.The color temperature value can be set according to the color temperatue range ofthe LED


    █  Application:

    1.Control dali dimming driver and CCT led driver
    2.Villa intelligent lighting
    3. Wireless intelligent lighting system can be accessed
    4.Museum lighting
    5.High end commercial lighting

    █  General description:
    Standard dali signals are used to control brightness and color temperature, 64 devices can be controlled at the same time, and the scene can be customizedand third-party voice control and can be realized through mobile app.The raw materials used are first-line brands, imported chip , Match a variety of Dali driver on the market accurately control the color temperature and brightness. The color temperature can be set according to the range of lamp beads. The built-in PS bus power supply can be on and off to make the wiring easier

    █  Specification:

    Model PE-X1-DALI
    OUTPUT Voltage 16-22Vdc
    Max output voltage 22V dc
    Current 125mA
    OUTPUT Dimming Range 0~100%
    Dimming interface DALI (IEC62386)
    Power off mode Power off memory function
    Load 64 pcs drivers
    INPUT Input voltage 200-250Vac
    Frequency 50/60Hz
    FUNCTION Touch Key 8 keys
    Timing on/off Yes
    Delay Off Turn off delay 30S
    Mobile App Tuya APP
    Color temperature Custom setting
    Scene Two scenarios can be customized
    PROTECTION Working Temperature ta:45°C,tc:80°C
    Working Humidity 20~95%RH,non-condensing
    Storage Temp.,Humidity 40~80°C,10~95%RH
    SAFETY&EMC Withstand Voltage I/P-O/P:3750Vac
    EMC Isolation Resistance I/P-O/P:100MO/500VDC/25°C/70%RH
    OTHERS Dimension 86x86x33mm(LxWxH)
    Packing Color box
    Weight 200g±10g











    █  DALI Setting:

    Address broadcast: set the address broadcast of dimmer Dali command, groups 1-16 Initialization lamp: initialize the gradient time and rate of all lamps on Dali bus. Power off memory color temperature, power off memory brightness.
    Assign group 01: assign group addresses to all drivers on the bus,group 1-group 16 Cool color 7042k: set the physical maximum color temperature and adjustable maximum color temperature of Dalilamp. Warm color 2000K: set the physical minimum color temperature and adjustable minimum color temperature of Dali lamp.
    Note 1: the operation in Dali setting adopts the broadcast address mode, that is, all control. For special lights that do not need operation, please cut off the power directly.
    Note 2: after modifying the data, you must press the key  to save it.
    Note 3: when the lamp is used for the first time, the brightness adjustment will be uneven by long pressing on the main interface. The lamp needs to be initialized first to achieve better adjustment effect.









    █  Instruction for use:

    Unless otherwise specified, all specifications and parameters shall be measured under the input of 230VAC, rated load and 25ambient temperature.Connect AC live line L and zero line n according to product identification.
    Attention:
    Note 1: when using this dimmer, please pay attention to distinguish the input end and output end. Do not connect it reversely. It can be powered on only after it is verified to be correct.
    Note 2: no live operation is required.
    Note 3: the input voltage range of the product is Ac 200_250v, which is used within the specified input voltage range.
    1. After the dimmer is electrically connected for the first time, it does not light up. Please cut off the AC input and check;
    1). Check whether the AC input terminal has poor contact
    2). If the AC input terminal is wrongly connected, do not connect the signal terminal, otherwise the dimmer will be damaged and cannot be repaired.
    3). In case of other questions or problems during the use of the product, please contact our company in time to communicate and feed back bad information. Our company will actively assist your company to solve the problems.

    █The abnormal conditions and the corresponding treatment methods:

    Digital Addressable lighting Interface (DALI)
    DALl slave unit will send data only master unit requests, that is, adopt command answering mode.There are 64 slave units at most in the same DALI network, each unit has a separate address(short address) , A salve unit can also be assigned to a certain group, and a slave unit can belong to different group, salve unit can exist up to 16 groups at the sametime, each unit can set 16 scenarios. The main features of the DALl protocol
    1)Asynchronous serial communication,
    2)1200 baud rate, using the Manchester encoding format.
    3)Two lies differential signal.
    4)The high level when differential voltage is larger than 9.5v.
    5)Thelowlevel when differential voltage islessthan 6.5v.
    6)The master unit controls communication process.
    7)One DALI bus can connect with 64 slave units.
    8)Each slave unit can be individually addressed.

    DALI Electrical Specification:

    Under the idle state, from machine unit method to control the bus :
    1)High Output power at ordinary time, not to interference in the hold signal.
    2) Output low electricity at ordinary time, directly to the DALI bus short circuit to each other.
    3)DALI bus maximum current of 250mA
    4)Not a two-way communication at the same time.
    5)Transmission cable up to 300 meters, or pressure drop is no more than 2v
    请提交您的基本信息,我们将会尽快与您联系!

相关产品